Ozak Speed Gates HG 02 GL

• Speed Gate designed especially for elegant locations aiming pedestrian access control and low-medium level security.
   
• Provides improved access security through sensors.
   
• A useful solution for locations with limited space, such as elevator lobbies due to its small dimensions.
   
• Also available with version suitable for pedestrians with reduced mobility (ADA access compliant passage width).

GENERAL SPECIFICATIONS:

Power  : 110/220V. 60/50 Hz. AC (% ± 10), 24 V DC.
Single Unit : at stand-by ~10 W, during passage max. ~39 W
Center Unit : at stand-by ~10 + 10 W, during passage max.~ 39 + 39 W

Dimensions Single Unit : 1000 x 1020 x 300 + wing length (275)
mm Center Unit : 1000 x 1020 x 300 + wing length (275 x 2) mm

Body Features :  The body is made of 304-grade (opt. 316-grade) satin finished stainless steel.

Wings :  RGB LED illuminated, 10 mm impact resistant tempered glass (opt. polycarbon) wings.

Top Lid : Tempered glass top lid (opt. other materials).

Weight:  ~59 kg (single), ~77 kg (center).

Operating Temperature, Humidity, IP Rating :(-20°C) – (+68°C) (opt:- 50°C with heater positive), RH 95% (±2%) non-condensing), IP 44 indoor.

Minimum Passage Performance: ≥ 15 Million passages

FUNCTIONAL FEATURES :

Passage :  System works bi-directional (in-out).
Normally the wings are in closed position. Upon authorization from the control unit, the wings open to allow passage of a single person and return to the closed position. In case of multiple authorization from the control unit, wings keep open until the continuous passages are completed. Built in sensors detect unauthorized entry into the passge area and gate generates audio/visual alarm. An unauthorized attempt by entering the passage area before thewings are closed, wings close to prevent the unauthorized passage while the gate generates alarm. In any case, presence of a person between the open wings is detected by safety sensors and gate stops the movement of the wings to prevent a harm to the person.

Flow Rate :  Wing opening speed/time : 0,5 sec. wing closing speed/time: 0,5 sec. Nominal : ~30 – 60 passages/minute (recommended reference figure). Utilisation of different access control units can change the flow rate.

Emergency Mode :  System allows free passage in emergency mode and in case of power failure by retracting wings into the gate body (powered by internal back-up battery).

SYSTEM SPECIFICATIONS :

Indicators  : An illuminated acrylic layer under the glass top lid is included. At standby, the acrylic layer illuminated in blue; during authorised passages it flashes green; when an unauthorized attempt is detected or during alert mode it flashes red.
Sliding asteroid animated indicator on top lid is optionally available.

Control System  : Controlled by dry contact or grounding input. All inputs are opto-coupler protected.

Integration :  Compatible with all access control systems that provide dry contact or grounding outputs. Optional RS232/RS485/TCP IP control module is available.

System Features :  Electronically controlled rapid wing movement for quick and smooth bi-directional passages. Internal dip switch selectable free passage by photocell detection, restricted access, controlled access on both or single direction modes are built in features.

Time Out  : 3-6-9-12 dipswitch selectable.

Output Data :  System provides dry contact passage feedback by relays separately for each direction. System provides busy signal during passage.

OPTIONAL ACCESSORIES AND APPLICATIONS :

Options :  Sliding asteroid animated indicator on top lid, remote control unit, manual control, coin slot/intelligent coin system and coin box, counter, card reader pole, photocell alarm sensor,interface unit for PC, RS485, RS232 and LAN, audio-messaging system, ¬base plate, separator.